[Auscope-geosciml] RE : GeoSciML v2.1 and FullMoon [SEC=UNCLASSIFIED]

Stephen M Richard steve.richard at azgs.az.gov
Fri Oct 30 13:11:24 EDT 2009


 I think alteration is a v3 change
steve

Boisvert, Eric wrote:
> What about Alteration ?  And to be fair, we also need to update the Fullmoon generated documentation.
> I guess if the people who want to test changes need the schema asap, the manual changes are the quickest way.
>  
> François, how much work is involved to link to the new HollowWorld ?
>  
> Eric
>  
>
> ________________________________
>
> De: auscope-geosciml-bounces at lists.arcs.org.au de la part de Oliver.Raymond at ga.gov.au
> Date: ven. 2009-10-30 01:38
> À: auscope-geosciml at lists.arcs.org.au
> Cc: Létourneau, François
> Objet : Re: [Auscope-geosciml] GeoSciML v2.1 and FullMoon [SEC=UNCLASSIFIED]
>
>
>
> Hi Francois and everone,
>
>  
>
> I have been struggling with what to do with the v2.1 model.  The original plan was:
>
> 1. add "faultType" to the v2.0 UML, 
>
> 2. re-export the XMI, 
>
> 3. re-generate schema through FullMoon.  
>
>  
>
> Unfortunately, the refactoring of HollowWorld since we made the v2.0 UML has thrown a spanner in the works, requiring (I think) a rebuild of the v2.0 UML to re-establish links with the new HollowWorld before we can run it through FullMoon.  
>
>  
>
> So, I thought "why don't we just manually add the faultType attribute to the geologicStructure.xsd file"?  It appears to be about 5 lines of code only, and it's a 5 minute job.  (See attached file)
>
>  
>
> Can anyone tell me if there is anything wrong with this solution and the attached file?  It would save me a lot of grief, and I could move on to the v3.0 UML development instead of mucking around with the v2.1 model.
>
>  
>
> Cheers,
>
> Ollie
>
>  
>
> ------------------------------------------------------------------------------------------------
>
> Ollie Raymond
> National Advice,  Maps and Standards Project
>
> Geoscience Australia
>
>  
>
> Address: GPO Box 378, Canberra, ACT, 2601, Australia | ABN: 80 091 799 039
>
> Ph: (02) 62499575 | Fax: (02) 62499992 | Email: Oliver.Raymond at ga.gov.au 
>
> Web:  http://www.ga.gov.au/minerals/research/national/nat_maps/nat_geol_maps.jsp <http://www.ga.gov.au/minerals/research/national/nat_maps/nat_geol_maps.jsp>  <http://www.ga.gov.au/geoscience/national> 
>
> Google Map <http://maps.google.com/maps?f=q&hl=en&geocode=&q=canberra+australia&ie=UTF8&ll=-35.344028,149.158362&spn=0.007684,0.016404&t=h&z=17&iwloc=addr&om=1>  
>
>  
>
> -- This message was created with 100% recycled electrons --
>
>  
>
>  
>
> -----Original Message-----
> From: Létourneau, François [mailto:Francois.Letourneau at RNCan-NRCan.gc.ca] 
> Sent: Tuesday, 27 October 2009 5:00 AM
> To: Raymond Oliver
> Cc: Boisvert, Eric
> Subject: RE: GeoSciML v2.1 and FullMoon [SEC=UNCLASSIFIED]
>
>  
>
> Hi Ollie,
>
>  
>
> One more word. Regarding the classmap, we need to build them ourselves (or ask the FullMoon team to add them to the existing ones). They are not generated by fullmoon. 
>
>  
>
> François
>
>  
>
> ________________________________
>
> De : Oliver.Raymond at ga.gov.au [mailto:Oliver.Raymond at ga.gov.au] 
> Envoyé : 21 octobre 2009 23:51
> À : Létourneau, François
> Objet : GeoSciML v2.1 and FullMoon [SEC=UNCLASSIFIED]
>
> Hi Francois,
>
>  
>
> I have put new XMI files and an unversioned EAP file in the GeoSciML/branches/2.1/model and ../eap folders on the subversion.  I hope these files are all you require for FullMoon.  The EAP file is unversioned because it uses an old copy of HollowWorld (ie; not the current version) which is required for GeoSciML v2.x
>
>  
>
> If you require anything else, could you tell me?
>
>  
>
> I'm not sure about the classMap files that accompanied v2.0 - they are not with v2.1.  Does FullMoon create these classMap files, or do we have to make them for FullMoon to use?  Also, I am fairly sure that the classMap tags in the UML model are not set properly, as they point to non-stable locations.  
>
>  
>
> Regards,
>
> Ollie
>
>  
>
>  
>
> ------------------------------------------------------------------------------------------------
>
> Ollie Raymond
> National Advice,  Maps and Standards Project
>
> Geoscience Australia
>
>  
>
> Address: GPO Box 378, Canberra, ACT, 2601, Australia | ABN: 80 091 799 039
>
> Ph: (02) 62499575 | Fax: (02) 62499992 | Email: Oliver.Raymond at ga.gov.au 
>
> Web:  http://www.ga.gov.au/minerals/research/national/nat_maps/nat_geol_maps.jsp <http://www.ga.gov.au/minerals/research/national/nat_maps/nat_geol_maps.jsp>  <http://www.ga.gov.au/geoscience/national> 
>
> Google Map <http://maps.google.com/maps?f=q&hl=en&geocode=&q=canberra+australia&ie=UTF8&ll=-35.344028,149.158362&spn=0.007684,0.016404&t=h&z=17&iwloc=addr&om=1>  
>
>  
>
> -- This message was created with 100% recycled electrons --
>
>  
>
>  
>
> _______________________________________________
> Auscope-geosciml mailing list
> Auscope-geosciml at lists.arcs.org.au
> http://lists.arcs.org.au/cgi-bin/mailman/listinfo/auscope-geosciml
>
>   

-- 
Stephen M. Richard
Section Chief, Geoinformatics
Arizona Geological Survey
416 W. Congress St., #100
Tucson, Arizona, 85701 USA

Phone: 
Office: (520) 209-4127
Reception: (520) 770-3500 
FAX: (520) 770-3505

email: steve.richard at azgs.az.gov




More information about the GeoSciML mailing list