[auscope-geosciml] Examples of operating GeoSciML WFS and clients

Alistair Ritchie alistair.bh.ritchie at gmail.com
Sun Aug 15 23:05:34 EDT 2010


Note that that should be
http://gsv-ws.dpi.vic.*gov*.au/SeamlessGeology/wms<http://gsv-ws.dpi.vic.gov.au/SeamlessGeology/wms?request=GetCapabilities>
.

Should type in URLs on the phone.

Alistair Ritchie
GEOSCIENCE VICTORIA | EARTH RESOURCES DIVISION
Department of Primary Industries | Melbourne, Victoria, Australia
Tel: +61 3 9658 4512 | Fax: +61 3 9658 4555


On 16 August 2010 11:57, Alistair Ritchie <alistair.bh.ritchie at gmail.com>wrote:

> Ah yes: WMS at:
>
> http://gsv-ws.dpi.vic.au/SeamlessGeology/wms
>
> Lithology and age layers use CGI vocals and SLDs (thanks Eric).
>
> Alistair
>
> On 16/08/2010, at 9:58, Bruce.Simons at dpi.vic.gov.au wrote:
>
>
> Hi Steve,
> The OpenDay should emphasise the GeoSciML 2.x production services rather
> than the GeoSciML 3.0 Testbed 4 services.  Its about adding more data
> suppliers to the mix rather than getting more people involved in GeoSciML
> development.
>
> GSV has WFS and WMS services up and running but I believe the only client
> consuming the GeoSciML WFS is the OneGeology client.  The AuScope Discovery
> Portal consumes the GA & GSV WMS and all the current EarthResourceML WFS.
>
> Cheers
> Bruce
>
> Ph: +61-3-9658 4502
> Fax: +61-3-9658 4555
> Mobile: +61 429 177155
>
>
>  *Stephen M Richard <steve.richard at azgs.az.gov>*
> Sent by: <auscope-geosciml-bounces at lists.arcs.org.au>
> auscope-geosciml-bounces at lists.arcs.org.au
>
> 14/08/2010 09:27 AM
>  Please respond to
>  <auscope-geosciml at lists.arcs.org.au>auscope-geosciml at lists.arcs.org.au
>
>   To
> "auscope-geosciml at lists.arcs.org.au" <auscope-geosciml at lists.arcs.org.au>
> cc
>   Subject
> [auscope-geosciml] Examples of operating GeoSciML WFS and clients
>
>
>
>
>   I'm scheduled to do a short presentation on live GeoSciML WFS and
> clients at the GeoSciML Open Day. If you have anything up and running
> that I can mention, please send me some information so I can check it
> out and get some screen shots, or maybe even try something live.
>
> thanks
> steve
>
> --
> Stephen M. Richard
> Arizona Geological Survey
> 416 W. Congress St., #100
> Tucson, Arizona, 85701
> USA
> phone: (520) 770-3500.  FAX: (520) 770-3505
> email: <steve.richard at azgs.az.gov>steve.richard at azgs.az.gov
>
> _______________________________________________
> auscope-geosciml mailing list
>  <auscope-geosciml at lists.arcs.org.au>auscope-geosciml at lists.arcs.org.au
>  <http://lists.arcs.org.au/cgi-bin/mailman/listinfo/auscope-geosciml>
> http://lists.arcs.org.au/cgi-bin/mailman/listinfo/auscope-geosciml
>
> Notice:
> This email and any attachments may contain information that is personal,
> confidential,
> legally privileged and/or copyright. No part of it should be reproduced,
> adapted or communicated without the prior written consent of the copyright
> owner.
>
> It is the responsibility of the recipient to check for and remove viruses.
>
> If you have received this email in error, please notify the sender by
> return email, delete it from your system and destroy any copies. You are not
> authorised to use, communicate or rely on the information contained in this
> email.
>
> Please consider the environment before printing this email.
>
>
>
>
>
>
>
> _______________________________________________
> auscope-geosciml mailing list
> auscope-geosciml at lists.arcs.org.au
> http://lists.arcs.org.au/cgi-bin/mailman/listinfo/auscope-geosciml
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengeospatial.org/pipermail/geosciml/attachments/20100816/9a300b07/attachment.htm>


More information about the GeoSciML mailing list