[auscope-geosciml] GeoSciML v3 UML model configuration [SEC=UNCLASSIFIED]

Oliver.Raymond at ga.gov.au Oliver.Raymond at ga.gov.au
Thu Oct 21 02:42:55 EDT 2010


Quantity, Quality, Vector, Matrix, DataRecord - all have similar equivalents in SWE1.

________________________________
From: auscope-geosciml-bounces at lists.arcs.org.au [mailto:auscope-geosciml-bounces at lists.arcs.org.au] On Behalf Of Simon.Cox at csiro.au
Sent: Thursday, 21 October 2010 5:36 PM
To: auscope-geosciml at lists.arcs.org.au
Subject: Re: [auscope-geosciml] GeoSciML v3 UML model configuration [SEC=UNCLASSIFIED]

Which SWE Common 2.0 classes does GeoSciML 3.0 use?
Do they have SWE Common 1.0 equivalents?

From: auscope-geosciml-bounces at lists.arcs.org.au [mailto:auscope-geosciml-bounces at lists.arcs.org.au] On Behalf Of Oliver.Raymond at ga.gov.au
Sent: Thursday, 21 October 2010 2:33 PM
To: auscope-geosciml at lists.arcs.org.au
Subject: Re: [auscope-geosciml] GeoSciML v3 UML model configuration [SEC=UNCLASSIFIED]

Apologies, it's obviously been too long since I got my OGC login.

Simon, since it appears that some IWG members may have difficulty getting access to the SWE2 resources (their organisations might not be OGC members), would you advise that we stick with SWE1 for the time being for GeoSciML v3?

Ollie

________________________________
From: auscope-geosciml-bounces at lists.arcs.org.au [mailto:auscope-geosciml-bounces at lists.arcs.org.au] On Behalf Of Simon.Cox at csiro.au
Sent: Thursday, 21 October 2010 5:27 PM
To: auscope-geosciml at lists.arcs.org.au
Subject: Re: [auscope-geosciml] GeoSciML v3 UML model configuration [SEC=UNCLASSIFIED]

Ollie's instructions are not quite correct.

First you must register as an 'Observer' of the SWE umbrella project, on the OGC _Portal_, not the OGC Network.
Then you must attach your credentials to the SVN.
Both require that you have an OGC _Portal_ login, which has the pre-requisite that you are affiliated with an OGC member organization.

The SWE Umbrella SVN contains the development work of a number of OGC SWGs (i.e. Standards Working Groups).
Since the results of their deliberations is incomplete and has not yet been published (i.e. made publicly available) it is only available to OGC members.
This is one of the privileges of OGC membership.
When it is published, it will be freely available.

Simon

From: auscope-geosciml-bounces at lists.arcs.org.au [mailto:auscope-geosciml-bounces at lists.arcs.org.au] On Behalf Of Stephen M Richard
Sent: Thursday, 21 October 2010 2:09 PM
To: auscope-geosciml at lists.arcs.org.au
Subject: Re: [auscope-geosciml] GeoSciML v3 UML model configuration [SEC=UNCLASSIFIED]

I don't seem to have an OGC portal account. I got registered on OGCNetwork, but doesn't seem to help logging into the portal...
steve

On 10/20/2010 8:09 PM, Oliver.Raymond at ga.gov.au<mailto:Oliver.Raymond at ga.gov.au> wrote:

Hi all,



The GeoSciML v3 (trunk) model now has links to SWECommon version 2 (in anticipation of the imminent release of that standard).  To access the SWE v2 uml packages through EA, you need to register with the OGC and checkout a copy of the xmi's from the OGC portal, then configure a new EA project to load HollowWorld with the SWE2 packages, before you can load the GeoSciML trunk model.



The updated instructions are here:  https://www.seegrid.csiro.au/wiki/bin/view/CGIModel/ConfiguringEnterpriseArchitectForGeoSciML



Cheers,

Ollie



------------------------------------------------------------------------------------
Ollie Raymond

National Advice, Maps and Data Standards Project
Geoscience Australia

GeoSciML Design Group
IUGS Commission for the Management and Application of Geoscience Information

------------------------------------------------------------------------------------

Address: GPO Box 378, Canberra, ACT, 2601, Australia | ABN: 80 091 799 039
Ph: +61 2 62499575 | Fax: +61 2 62499992 | Email: Oliver.Raymond at ga.gov.au <mailto:Oliver.Raymond at ga.gov.au> | Google Map <http://maps.google.com/maps?f=q&hl=en&geocode=&q=canberra+australia&ie=UTF8&ll=-35.344028,149.158362&spn=0.007684,0.016404&t=h&z=17&iwloc=addr&om=1>
National geological maps  http://www.ga.gov.au/minerals/research/national/nat_maps/nat_geol_maps.jsp
Geoscience Australia web services  http://www.ga.gov.au/resources/applications/ogc-wms.jsp
------------------------------------------------------------------------------------

 --- This message was created with 100% recycled electrons ---







_______________________________________________

auscope-geosciml mailing list

auscope-geosciml at lists.arcs.org.au<mailto:auscope-geosciml at lists.arcs.org.au>

http://lists.arcs.org.au/cgi-bin/mailman/listinfo/auscope-geosciml


--

Stephen M. Richard

Arizona Geological Survey

416 W. Congress St., #100

Tucson, Arizona, 85701

USA

phone: 520 209-4127

AZGS Main: (520) 770-3500.  FAX: (520) 770-3505

email: steve.richard at azgs.az.gov<mailto:steve.richard at azgs.az.gov>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengeospatial.org/pipermail/geosciml/attachments/20101021/26fa9add/attachment.htm>


More information about the GeoSciML mailing list