[auscope-geosciml] RE : GeoSciML v3.0 instance documents top feature?

Bruce.Simons at dpi.vic.gov.au Bruce.Simons at dpi.vic.gov.au
Wed Aug 31 19:36:01 EDT 2011


I understand that the server replaces the namespace abbreviation.
However, if a service is providing both GeoSciML v2, v3 and Portrayal the 
filter doesn't know which version of  GeologicUnit to query unless the 
namespace is included. So this query works:

http://geology.data.vic.gov.au/services-test/geosciml/testbed/250k/wfs?SERVICE=WFS&VERSION=1.1.0&REQUEST=GetFeature&TYPENAME=gsmlp:GeologicUnitView&MAXFEATURES=1

but this won't:
http://geology.data.vic.gov.au/services-test/geosciml/testbed/250k/wfs?SERVICE=WFS&VERSION=1.1.0&REQUEST=GetFeature&TYPENAME=GeologicUnitView&MAXFEATURES=1

So all the querys have to have the full namespace or we agree on 
abbreviations. Yes?

Bruce Simons
----------------------------------------------------
Senior Information Systems Analyst
Prospectivity & Exploration, Earth Resources Development Division
IUGS-Commission for Geoscience Information Oceania Councillor
Level 9, 55 Collins St
PO Box 4440
Melbourne, Victoria, 3001
Australia

Ph: +61-3-9658 4502
Fax: +61-3-9658 4555
Mobile: +61 429 177155



From:   "Boisvert, Eric" <Eric.Boisvert at RNCan-NRCan.gc.ca>
To:     <auscope-geosciml at lists.arcs.org.au>
Date:   01/09/2011 08:35 AM
Subject:        [auscope-geosciml] RE :  GeoSciML v3.0 instance documents 
top feature?
Sent by:        auscope-geosciml-bounces at lists.arcs.org.au



>Secondly, for query purposes, do we have to agree on these namespace 
abbreviations as part of the GeoSciML v3 profile?
 
No.  Only the namespace matters.  The prefix is just a shortcut that 
points to the full namespace.  You can take whatever you want, as long as 
the correct namespace is provided.
 
As far as the service is concerned, you can use xmlns:beer= <
http://xmlns.geosciml.org/GeoSciML-Core/3.0> 
http://xmlns.geosciml.org/GeoSciML-Core/3.0 <
http://xmlns.geosciml.org/GeoSciML-Core/3.0>  and beer:MappedFeature  must 
work. The XML parser internally replaces all "beer" occurences by "
http://xmlns.geosciml.org/GeoSciML-Core/3.0 <
http://xmlns.geosciml.org/GeoSciML-Core/3.0> ".
 
Note, that namespace declaration shall also be declared in a KVP request 
(HTTP GET)
 
http://www.someserver.com/wfs.cgi <http://www.someserver.com/wfs.cgi> ? 
SERVICE=WFS&
VERSION=2.0.0&REQUEST=GetFeature&NAMESPACES=xmlns(myns,
http://www.someserver.com),xmlns(yourns,http://www.someotherserver.com) 
...
 
But some services (like Mapserver) "cheat" and assume that the prefix you 
use (eg TYPENAME=gsml:MappedFeature) will match the prefix exposed in the 
GetCapabilities.
 
Eric
 

 
________________________________

De: auscope-geosciml-bounces at lists.arcs.org.au de la part de 
Bruce.Simons at dpi.vic.gov.au
Date: mer. 2011-08-31 18:14
À: auscope-geosciml at lists.arcs.org.au
Objet : Re: [auscope-geosciml] GeoSciML v3.0 instance documents top 
feature?


Hi all, 
Gilly has proposed the following namespaces: 
        xmlns:gsml="http://xmlns.geosciml.org/GeoSciML-Core/3.0 <
http://xmlns.geosciml.org/GeoSciML-Core/3.0> "
       xmlns:cgu="http://xmlns.geosciml.org/Utilities/3.0 <
http://xmlns.geosciml.org/Utilities/3.0> "
       xmlns:gt="http://xmlns.geosciml.org/GeologicTime/3.0 <
http://xmlns.geosciml.org/GeologicTime/3.0> "
       xmlns:gbh="http://xmlns.geosciml.org/Borehole/3.0 <
http://xmlns.geosciml.org/Borehole/3.0> "
       xmlns:glab="
http://xmlns.geosciml.org/LaboratoryAnalysis-Specimen/3.0 <
http://xmlns.geosciml.org/LaboratoryAnalysis-Specimen/3.0> "
       xmlns:gpp="http://xmlns.geosciml.org/PhysicalProperties/3.0 <
http://xmlns.geosciml.org/PhysicalProperties/3.0> "
       xmlns:trs="http://xmlns.geosciml.org/TemporalReferenceSystem/3.0 <
http://xmlns.geosciml.org/TemporalReferenceSystem/3.0> "
       xmlns:gsmlc="http://xmlns.geosciml.org/Collection/3.0 <
http://xmlns.geosciml.org/Collection/3.0> "
       xmlns:gsmlem="http://xmlns.geosciml.org/EarthMaterial/3.0 <
http://xmlns.geosciml.org/EarthMaterial/3.0> "
       xmlns:gsmlga="http://xmlns.geosciml.org/GeologicAge/3.0 <
http://xmlns.geosciml.org/GeologicAge/3.0> "
       xmlns:gsmlgm="http://xmlns.geosciml.org/Geomorphology/3.0 <
http://xmlns.geosciml.org/Geomorphology/3.0> "
       xmlns:gsmlgu="http://xmlns.geosciml.org/GeologicUnit/3.0 <
http://xmlns.geosciml.org/GeologicUnit/3.0> "
       xmlns:gsmlst="http://xmlns.geosciml.org/GeologicStructure/3.0 <
http://xmlns.geosciml.org/GeologicStructure/3.0> "

Firstly, for consistency and uniqueness purposes, shouldn't we use: 
        xmlns:gsml30="http://xmlns.geosciml.org/GeoSciML-Core/3.0 <
http://xmlns.geosciml.org/GeoSciML-Core/3.0> "
       xmlns:gsmlcgu="http://xmlns.geosciml.org/Utilities/3.0 <
http://xmlns.geosciml.org/Utilities/3.0> "
       xmlns:gsmlgt="http://xmlns.geosciml.org/GeologicTime/3.0 <
http://xmlns.geosciml.org/GeologicTime/3.0> "
       xmlns:gsmlbh="http://xmlns.geosciml.org/Borehole/3.0 <
http://xmlns.geosciml.org/Borehole/3.0> "
       xmlns:gsmllab="
http://xmlns.geosciml.org/LaboratoryAnalysis-Specimen/3.0 <
http://xmlns.geosciml.org/LaboratoryAnalysis-Specimen/3.0> "
       xmlns:gsmlpp="http://xmlns.geosciml.org/PhysicalProperties/3.0 <
http://xmlns.geosciml.org/PhysicalProperties/3.0> "
       xmlns:trs="http://xmlns.geosciml.org/TemporalReferenceSystem/3.0 <
http://xmlns.geosciml.org/TemporalReferenceSystem/3.0> "
       xmlns:gsmlc="http://xmlns.geosciml.org/Collection/3.0 <
http://xmlns.geosciml.org/Collection/3.0> "
       xmlns:gsmlem="http://xmlns.geosciml.org/EarthMaterial/3.0 <
http://xmlns.geosciml.org/EarthMaterial/3.0> "
       xmlns:gsmlga="http://xmlns.geosciml.org/GeologicAge/3.0 <
http://xmlns.geosciml.org/GeologicAge/3.0> "
       xmlns:gsmlgm="http://xmlns.geosciml.org/Geomorphology/3.0 <
http://xmlns.geosciml.org/Geomorphology/3.0> "
       xmlns:gsmlgu="http://xmlns.geosciml.org/GeologicUnit/3.0 <
http://xmlns.geosciml.org/GeologicUnit/3.0> "
       xmlns:gsmlgs="http://xmlns.geosciml.org/GeologicStructure/3.0 <
http://xmlns.geosciml.org/GeologicStructure/3.0> "

Secondly, for query purposes, do we have to agree on these namespace 
abbreviations as part of the GeoSciML v3 profile? If I use gsmlgs and 
others use gsmlst for "http://xmlns.geosciml.org/GeologicStructure/3.0 <
http://xmlns.geosciml.org/GeoSciML-Core/3.0> " then can a request to both 
services for 'Contact" be made, and if so is it only if the full namespace 
is included in the request? 
If we have to agree on the abbreviations then this will need to be 
formally documented. 

Cheers 
Bruce Simons
----------------------------------------------------
Senior Information Systems Analyst 
Prospectivity & Exploration, Earth Resources Development Division
IUGS-Commission for Geoscience Information Oceania Councillor 
Level 9, 55 Collins St 
PO Box 4440 
Melbourne, Victoria, 3001 
Australia 

Ph: +61-3-9658 4502
Fax: +61-3-9658 4555 
Mobile: +61 429 177155 



From:        <Guillaume.Duclaux at csiro.au> 
To:        <auscope-geosciml at lists.arcs.org.au> 
Date:        24/08/2011 11:13 PM 
Subject:        [auscope-geosciml] GeoSciML v3.0 instance documents top 
feature? 
Sent by:        auscope-geosciml-bounces at lists.arcs.org.au 

________________________________




Hi folks,

Could one of the WFS guru advised me on (1) what version of WFS, and (2) 
what top feature  should be used for drafting the instance doc?

<wfs:FeatureCollection> seems to be the most common top feature in the 
instance doc available here (
https://www.seegrid.csiro.au/subversion/GeoSciML/branches/3.0.0/instances/ 
<
https://www.seegrid.csiro.au/subversion/GeoSciML/branches/3.0.0/instances/
> ), or should we use a <gsmlc:Collection>, or something else?

If you're looking for them, here is the list of all the GeoSciML v.3.0 
namespaces:

       xmlns:gsml="http://xmlns.geosciml.org/GeoSciML-Core/3.0 <
http://xmlns.geosciml.org/GeoSciML-Core/3.0> "
       xmlns:cgu="http://xmlns.geosciml.org/Utilities/3.0 <
http://xmlns.geosciml.org/Utilities/3.0> "
       xmlns:gt="http://xmlns.geosciml.org/GeologicTime/3.0 <
http://xmlns.geosciml.org/GeologicTime/3.0> "
       xmlns:gbh="http://xmlns.geosciml.org/Borehole/3.0 <
http://xmlns.geosciml.org/Borehole/3.0> "
       xmlns:glab="
http://xmlns.geosciml.org/LaboratoryAnalysis-Specimen/3.0 <
http://xmlns.geosciml.org/LaboratoryAnalysis-Specimen/3.0> "
       xmlns:gpp="http://xmlns.geosciml.org/PhysicalProperties/3.0 <
http://xmlns.geosciml.org/PhysicalProperties/3.0> "
       xmlns:trs="http://xmlns.geosciml.org/TemporalReferenceSystem/3.0 <
http://xmlns.geosciml.org/TemporalReferenceSystem/3.0> "
       xmlns:gsmlc="http://xmlns.geosciml.org/Collection/3.0 <
http://xmlns.geosciml.org/Collection/3.0> "
       xmlns:gsmlem="http://xmlns.geosciml.org/EarthMaterial/3.0 <
http://xmlns.geosciml.org/EarthMaterial/3.0> "
       xmlns:gsmlga="http://xmlns.geosciml.org/GeologicAge/3.0 <
http://xmlns.geosciml.org/GeologicAge/3.0> "
       xmlns:gsmlgm="http://xmlns.geosciml.org/Geomorphology/3.0 <
http://xmlns.geosciml.org/Geomorphology/3.0> "
       xmlns:gsmlgu="http://xmlns.geosciml.org/GeologicUnit/3.0 <
http://xmlns.geosciml.org/GeologicUnit/3.0> "
       xmlns:gsmlst="http://xmlns.geosciml.org/GeologicStructure/3.0 <
http://xmlns.geosciml.org/GeologicStructure/3.0> "

and the schema location associated to each namespace is as follow:

namespace="http://xmlns.geosciml.org/Utilities/3.0 <
http://xmlns.geosciml.org/Utilities/3.0> "
schemaLocation="
http://schemas.geosciml.org/cgiutilities/3.0/cgiUtilities.xsd <
http://schemas.geosciml.org/cgiutilities/3.0/cgiUtilities.xsd> "

namespace="http://xmlns.geosciml.org/GeoSciML-Core/3.0 <
http://xmlns.geosciml.org/GeoSciML-Core/3.0> "
schemaLocation="
http://schemas.geosciml.org/geosciml-core/3.0/geosciml-core.xsd <
http://schemas.geosciml.org/geosciml-core/3.0/geosciml-core.xsd> "

namespace="http://xmlns.geosciml.org/GeologicTime/3.0 <
http://xmlns.geosciml.org/GeologicTime/3.0> "
schemaLocation="http://schemas.geosciml.org/geotime/3.0/geologicTime.xsd <
http://schemas.geosciml.org/geotime/3.0/geologicTime.xsd> "

namespace="http://xmlns.geosciml.org/Borehole/3.0 <
http://xmlns.geosciml.org/Borehole/3.0> "
schemaLocation="http://schemas.geosciml.org/borehole/3.0/borehole.xsd <
http://schemas.geosciml.org/borehole/3.0/borehole.xsd> "

namespace="http://xmlns.geosciml.org/LaboratoryAnalysis-Specimen/3.0 <
http://xmlns.geosciml.org/LaboratoryAnalysis-Specimen/3.0> "
schemaLocation="
http://schemas.geosciml.org/laboratoryanalysis-specimen/3.0/laboratoryAnalysis-Specimen.xsd 
<
http://schemas.geosciml.org/laboratoryanalysis-specimen/3.0/laboratoryAnalysis-Specimen.xsd
> "

namespace="http://xmlns.geosciml.org/PhysicalProperties/3.0 <
http://xmlns.geosciml.org/PhysicalProperties/3.0> "
schemaLocation="
http://schemas.geosciml.org/physicalproperties/3.0/physicalProperties.xsd 
<http://schemas.geosciml.org/physicalproperties/3.0/physicalProperties.xsd
> "

namespace="http://xmlns.geosciml.org/TemporalReferenceSystem/3.0 <
http://xmlns.geosciml.org/TemporalReferenceSystem/3.0> "
schemaLocation="
http://schemas.geosciml.org/temporalreferencesystem/3.0/trs.xsd <
http://schemas.geosciml.org/temporalreferencesystem/3.0/trs.xsd> "

namespace="http://xmlns.geosciml.org/Collection/3.0 <
http://xmlns.geosciml.org/Collection/3.0> "
schemaLocation="http://schemas.geosciml.org/collection/3.0/collection.xsd 
<http://schemas.geosciml.org/collection/3.0/collection.xsd> "

namespace="http://xmlns.geosciml.org/EarthMaterial/3.0 <
http://xmlns.geosciml.org/EarthMaterial/3.0> "
schemaLocation="
http://schemas.geosciml.org/earthmaterial/3.0/earthMaterial.xsd <
http://schemas.geosciml.org/earthmaterial/3.0/earthMaterial.xsd> "

namespace="http://xmlns.geosciml.org/GeologicAge/3.0 <
http://xmlns.geosciml.org/GeologicAge/3.0> "
schemaLocation="
http://schemas.geosciml.org/geologicage/3.0/geologicAge.xsd <
http://schemas.geosciml.org/geologicage/3.0/geologicAge.xsd> "

namespace="http://xmlns.geosciml.org/GeologicStructure/3.0 <
http://xmlns.geosciml.org/GeologicStructure/3.0> "
schemaLocation="
http://schemas.geosciml.org/geologicstructure/3.0/geologicStructure.xsd <
http://schemas.geosciml.org/geologicstructure/3.0/geologicStructure.xsd> "

namespace="http://xmlns.geosciml.org/GeologicUnit/3.0 <
http://xmlns.geosciml.org/GeologicUnit/3.0> "
schemaLocation="
http://schemas.geosciml.org/geologicunit/3.0/geologicUnit.xsd <
http://schemas.geosciml.org/geologicunit/3.0/geologicUnit.xsd> "

namespace="http://xmlns.geosciml.org/Geomorphology/3.0 <
http://xmlns.geosciml.org/Geomorphology/3.0> "
schemaLocation="
http://schemas.geosciml.org/geomorphology/3.0/geomorphology.xsd <
http://schemas.geosciml.org/geomorphology/3.0/geomorphology.xsd> "
Cheers

Gilly

Dr Guillaume Duclaux
CSIRO Earth Science and Resource Engineering
guillaume.duclaux at csiro.au<mailto:guillaume.duclaux at csiro.au <
mailto:guillaume.duclaux at csiro.au> >
Address: Australian Resources Research Centre, 26 Dick Perry Avenue, 
Kensington WA 6151



_______________________________________________
auscope-geosciml mailing list
auscope-geosciml at lists.arcs.org.au
http://lists.arcs.org.au/cgi-bin/mailman/listinfo/auscope-geosciml <
http://lists.arcs.org.au/cgi-bin/mailman/listinfo/auscope-geosciml> 



Notice:
This email and any attachments may contain information that is personal, 
confidential,
legally privileged and/or copyright. No part of it should be reproduced, 
adapted or communicated without the prior written consent of the copyright 
owner. 

It is the responsibility of the recipient to check for and remove viruses.

If you have received this email in error, please notify the sender by 
return email, delete it from your system and destroy any copies. You are 
not authorised to use, communicate or rely on the information contained in 
this email.

Please consider the environment before printing this email.

 

 

 

_______________________________________________
auscope-geosciml mailing list
auscope-geosciml at lists.arcs.org.au
http://lists.arcs.org.au/cgi-bin/mailman/listinfo/auscope-geosciml


Notice:
This email and any attachments may contain information that is personal, 
confidential, legally privileged and/or copyright.No part of it should be reproduced, 
adapted or communicated without the prior written consent of the copyright owner. 

It is the responsibility of the recipient to check for and remove viruses.
If you have received this email in error, please notify the sender by return email, delete 
it from your system and destroy any copies. You are not authorised to use, communicate or rely on the information 
contained in this email.

Please consider the environment before printing this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengeospatial.org/pipermail/geosciml/attachments/20110901/3b2a3452/attachment.htm>


More information about the GeoSciML mailing list