[auscope-geosciml] [ExternalEmail] Re: Quantity vs QuantityRange [SEC=UNCLASSIFIED]

Boisvert, Eric Eric.Boisvert at RNCan-NRCan.gc.ca
Mon Jun 20 08:09:25 EDT 2011


I've been looking in the sweCommon spec if there was a hook somewhere where you can insert a link to observations (and play the role of <<estimatedProperty>>), but could not find any.
swe:Quality would have been a good spot. 
 
currently, it's
 
 
 
 adding a byEvidence (or whatever) : OM_Observation  - as suggested by Simon - and this one has a bunch of relatedObservation to support observations
 
Can we subtype a Union ? (I mean, is it allowed in the encoding rules ?) and add our own semantic 
 
Otherwise, maybe it worth a CR to sweCommon (too bad we did not discussed this earlier)
 
Another solution is to use reification (can you tell I've been reading about RDF?) and have a way to reference a particular association and attach observation.
 
Eric
 
 

________________________________

De : auscope-geosciml-bounces at lists.arcs.org.au [mailto:auscope-geosciml-bounces at lists.arcs.org.au] De la part de Oliver.Raymond at ga.gov.au
Envoyé : 19 juin 2011 23:51
À : auscope-geosciml at lists.arcs.org.au
Objet : Re: [auscope-geosciml] [ExternalEmail] Re: Quantity vs QuantityRange [SEC=UNCLASSIFIED]



Hi all,

 

Here are a few things to consider about CGI_Term and swe:Quantity...

 

1.    CGI_Term is already set up as a "reference to dictionary entries".  The CGI_Term/value attribute is a byReference pointer a dictionary term.  The thing that separates CGI_Term from only being a dictionary term is that is also contains a nillable CGI_Term/qualifier attribute (also a dictionary term).  We have only left CGI_Term in the model where we thought that a property's value required a qualifier (eg, contactCharacter).  All other occurrences of text descriptions are straight dictionary terms (eg, geologicUnitType).

 

eg:    

              <gsml:contactCharacter>

                  <cgu:CGI_Term>
                     <cgu:qualifier xlink:href="http://resource.geosciml.org/classifier/cgi/valuequalifier/0004" xlink:title="common"/>
                     <cgu:value xlink:href="http://resource.geoscience.gov.au/classifier/ga/contactcharacter/0099" xlink:title="Gradational contact"/>
                  </cgu:CGI_Term>
              </gsml:contactCharacter>

 

The only place where unconstrained character strings still exist in the model is in the Timescale package, which has not really been properly revisited since the original version 1.

 

2.   gml:measure is a very compact and simple xml representation of a simple numeric value.  It takes one line of xml to deliver a simple version of what is delivered in at least 4 lines by swe:Quantity.

However, I like the fact that swe:Quantity has a built in error/uncertainty part (swe:Quantity/quality) as well.  You don't have to add a separate uncertainty/error attribute on top of gml:measure (like is done with resultQuality/DQ_Element in OM_Observation - see example below).  In short, gml:measure is good for delivery of a number and a unit-of-measure only.

 

eg:

                <om:OM_Observation gml:id="GAGeochemAnalysis_1526753_SiO2">

                    <om:resultQuality>
                        <gmd:DQ_QuantitativeAttributeAccuracy>
                            <gmd:nameOfMeasure>
                                <gco:CharacterString>Analytical Error</gco:CharacterString>
                            </gmd:nameOfMeasure>
                            <gmd:result>
                                <gmd:DQ_QuantitativeResult>
                                    <gmd:valueUnit xlink:href="http://www.opengis.net/def/uom/UCUM/0/%25" xlink:title="percent"/>
                                    <gmd:value>
                                        <gco:Record>0.1</gco:Record>
                                    </gmd:value>
                                </gmd:DQ_QuantitativeResult>
                            </gmd:result>
                        </gmd:DQ_QuantitativeAttributeAccuracy>
                    </om:resultQuality>
                    <om:result>
                        <gml:measure uom="http://www.opengis.net/def/uom/UCUM/0/%25">76.4</gml:measure>
                    </om:result>

                </om:OM_Observation>

 

versus: 


            <om:OM_Observation gml:id="GAGeochemAnalysis_1526753_SiO2">

               <om:result>
                    <swe:Quantity definition="http://resource.geoscience.gov.au/classifier/ga/SiO2_concentration">
                        <swe:quality> 
                              <swe:Quantity definition="http://resource.geoscience.gov.au/classifier/ga/analytical_error">
                                  <swe:uom code="%25" xlink:href="http://www.opengis.net/def/uom/UCUM/0/%25" xlink:title="percent"/>
                                  <swe:value>0.1</swe:value>
                              </swe:Quantity>
                        </swe:quality>
                        <swe:uom code="%25" xlink:href="http://www.opengis.net/def/uom/UCUM/0/%25" xlink:title="percent"/>
                        <swe:value>76.4</swe:value>
                   </swe:Quantity>
             </om:result>

          </om:OM_Observation>

 

3.  You can also deliver statistical values with swe:Quantity without having to create some additional gsml class or attribute to qualify gml:measure

 

eg:    

          <swe:Quantity definition="http://dictionary.uncertml.org/statistics/median">
              <swe:uom code="SI" xlink:href="http://www.opengis.net/def/uom/UCUM/0/SI" xlink:title="SI units"/>
              <swe:value>1600e-5</swe:value>
          </swe:Quantity>

 

instead of:

            <gsml:numericValue>

               <gsml:statisticType xlink:href="http://dictionary.uncertml.org/statistics/median"/>
               <gml:measure uom="http://www.opengis.net/def/uom/UCUM/0/SI">1600e-5</gml:measure>

            </gsml:numericValue>

                

4.   Places in GeoSciML where I think gml:measure could be used in place of swe:Quantity (ie, where there is probably no requirement for an error or a statistical qualifier to be delivered)

 

- MappedFeature/positionalAccuracy

- MetamorphicDescription/peakTemperatureValue 

- MetamorphicDescription/peakPressureValue

- Borehole/nominalDiameter 

- Borehole/boreholeLength

 

5.   QuantityRange vs CGI_NumericRange

                a. QuantityRange is much simpler than CGI_NumericRange - it is the same as the swe:Quantity class, but delivers a pair of numbers in the "value" attribute

                b. The "quality" attribute in the swe:QuantityRange class applies to the whole range (ie, both values in the pair)

                c.  CGI_NumericRange delivers two (upper and lower) swe:Quantity values (each with their own "quality" values), and an estimated single value for use cases where it is appropriate to deliver a single middle value.

 

Replacing cgu:CGI_NumericRange with swe:QuantityRange would reduce its capability, but looking at all the places that we have used CGI_NumericRange, I think that this simplification is probably appropriate, ie:

                - GeologicUnit/unitThickness

                - BeddingDescription/beddingThickness

                - FoldSystem/wavelength

                - Foliation/spacing

- Fold/amplitude

- Fold/span

- ParticleGeometryDescription/size

- CompositionPart/proportion

- ConstituentPart/proportion

 

In cases where real world values of these properties are actually one value, not a range, they could be delivered as the same 2 numbers in the QuantityRange/value pair.

 

(And it's one less thing in the model for us to manage)

 

Cheers,

Ollie

 

 

-----Original Message-----
From: auscope-geosciml-bounces at lists.arcs.org.au [mailto:auscope-geosciml-bounces at lists.arcs.org.au] On Behalf Of Guillaume.Duclaux at csiro.au
Sent: Saturday, 18 June 2011 3:45 PM
To: auscope-geosciml at lists.arcs.org.au
Subject: Re: [auscope-geosciml] [ExternalEmail] Re: Quantity vs QuantityRange [SEC=UNCLASSIFIED]

 

I fully agree with Eric and Simon on this.

ISO and OGC standards certainly offer equivalents for most of the CGI_* class attributes.

 

Cheers

Gilly

 

Dr Guillaume Duclaux 

Mineral Down Under Flagship | AuScope Grid

CSIRO Earth Science and Resource Engineering

guillaume.duclaux at csiro.au  

Address: Australian Resources Research Centre, 26 Dick Perry Avenue, Kensington WA 6151

 

 

 

On 18/06/2011, at 11:29 AM, <Simon.Cox at csiro.au> <Simon.Cox at csiro.au> wrote:

 

> I agree with Eric.

> If SWE Common can do it, then we should get rid of CGI_Value etc.

> 

> However, I also think that we should still review all the class attributes and convert them to Measure and references to dictionary entries.

> The primary goal of geosciml is data transfer for plotting and analysis, it is not for transfer of all musings from a field notebook.

> It would be so much easier on clients to just collapse all the values to scalars.

> Yes, this requires the data provider to make some decisions about what they tell the client.

> Commitment is sometimes good and useful.

> 

> 

> Simon Cox

> Research Scientist

> CSIRO Earth Science & Resource Engineering

> 

> Phone: +61 8 6436 8639 | Fax: +61 8 6436 8555 | Mobile: 0403 302 672

> simon.cox at csiro.au | www.csiro.au

> Address: ARRC, PO Box 1130, Bentley, WA 6102, Australia

> ________________________________________

> From: auscope-geosciml-bounces at lists.arcs.org.au [auscope-geosciml-bounces at lists.arcs.org.au] On Behalf Of Boisvert, Eric [Eric.Boisvert at RNCan-NRCan.gc.ca]

> Sent: Friday, 17 June 2011 10:58 PM

> To: auscope-geosciml at lists.arcs.org.au

> Subject: Re: [auscope-geosciml] Quantity vs QuantityRange [SEC=UNCLASSIFIED]

> 

>> 2) use CGI_TermRange in those cases where CGI_Term (1..*) is really meant to indicate a range (eg, for particle sorting and metamorphic facies?) rather than a set of random single values

> 

> A range should only have 2 terms right (assuming the terms are ordinal) ?

> 

> I already expressed my opinions about this.  Since GeoSciML imports O&M and O&M imports swe, we end up with 2 value representations that overlaps.

> As far as terms are concerned, there are Category and CategoryRange that could replace CGI_Term and CGI_TermRange, and QuantityRange can replace CGI_NumericRange.

> 

> What's left are the specialised numerical representation (NumericalAgeRange and PlanarOrientation).

> They could be simulated with swe:DataRecord.  Maybe it's a bit of a stretch ?

> 

> Eric

> 

> ________________________________

> De : auscope-geosciml-bounces at lists.arcs.org.au [mailto:auscope-geosciml-bounces at lists.arcs.org.au] De la part de Oliver.Raymond at ga.gov.au

> Envoyé : 16 juin 2011 22:01

> À : auscope-geosciml at lists.arcs.org.au

> Objet : Re: [auscope-geosciml] Quantity vs QuantityRange [SEC=UNCLASSIFIED]

> 

> Hi Eric,

> 

> peakPressureValue and peakTemperatureValue must, by the nature of being a "peak" value, be only one number and not a range.  That one number may have an error associated with it.   There is a subtle difference between a range (2 numbers, upper and lower values, both of which may have errors - like NumericAge), and a single value number with an error.  The chemical assay is an example of a single number (swe:quantity) with an error (swe:quality) -  the pattern works for me.

> 

> On a related point, I was recently mulling over the various places in the model that we use either a term range (eg, AlterationDescription/alterationDegree) or multiple single values (eg, MetamorphicDescription/metamorphicFacies, and ParticleGeometryDescription/sorting).  I think there is scope for more consistent use of ranges or multiple values.  Typically in the model, we are using CGI_Term (1..*) for cases where more than one term is allowed, including where those multiple terms imply a range.  AlterationDescription/alterationDegree is the only place in the model where we still use CGI_TermRange.

> 

> This suggests to me that we should either:    1) stop using CGI_TermRange altogether and remove it from the model, or

> 2) use CGI_TermRange in those cases where CGI_Term (1..*) is really meant to indicate a range (eg, for particle sorting and metamorphic facies?) rather than a set of random single values

> 

> Cheers,

> Ollie

> 

> _______________________________________________________________________

> 

> Ollie Raymond

> 

> Project Leader

> National Geological Maps and Data Standards Project<http://www.ga.gov.au/minerals/projects/current-projects/geological-maps-standards.html>

> Geoscience Australia

> 

> Interoperability Working Group<https://www.seegrid.csiro.au/wiki/bin/view/CGIModel/InteroperabilityWG>

> IUGS Commission for the Management and Application of Geoscience Information

> 

> Address: GPO Box 378, Canberra, ACT, 2601, Australia | ABN: 80 091 799 039

> Ph: +61 2 62499575  |  Fax: +61 2 62479992  |  Email: oliver.raymond at ga.gov.au<mailto:oliver.raymond at ga.gov.au>  |  Google Map<http://maps.google.com/maps?f=q&hl=en&geocode=&q=canberra+australia&ie=UTF8&ll=-35.344028,149.158362&spn=0.007684,0.016404&t=h&z=17&iwloc=addr&om=1>

> _______________________________________________________________________

> 

> --- This message was created with 100% recycled electrons ---

> 

> ________________________________

> From: auscope-geosciml-bounces at lists.arcs.org.au [mailto:auscope-geosciml-bounces at lists.arcs.org.au] On Behalf Of Boisvert, Eric

> Sent: Friday, 17 June 2011 1:09 AM

> To: auscope-geosciml at lists.arcs.org.au

> Subject: [auscope-geosciml] Quantity vs QuantityRange

> 

> 

> 

> I see (for example) that MetamorphicDescription has peakPressureValue and preakTemperatureValue as swe:Quantity and not as swe:QuantityRange

> 

> But I also noticed that Olllie used that pattern

> 

>                       <swe:Quantity gml:id="GAGeochemAnalysis_1526753_SiO2_Result" definition="SiO2 concentration">

>                            <swe:uom code="%25" xlink:href="http://www.opengis.net/def/uom/UCUM/0/%25" xlink:title="percent"/>

> 

>                            <swe:quality>     <!-- Analytical Error -->

>                                <swe:Quantity gml:id="GAGeochemAnalysis_1526753_SiO2_Error" definition="SiO2 analytical error">

> 

>                                    <swe:uom code="%25" xlink:href="http://www.opengis.net/def/uom/UCUM/0/%25" xlink:title="percent"/>

> 

>                                    <swe:value>0.1</swe:value>

>                                </swe:Quantity>

>                            </swe:quality>

>                            <swe:value>76.4</swe:value>

>                        </swe:Quantity>

> 

> 

> The error band is stored in the swe:quality.  I suppose a range can be expressed the same way (swe:quality can be a QuantityRange and swe:value can be absent) - is this the pattern ?

> 

> Eric

> 

> ================================================================

> Eric Boisvert

> Expert  TI-GI / IT-IM Expert

> Eric.Boisvert at rncan.gc.ca, 418-654-3705, facsimile/télécopieur

> 418-654-2615

> 490, rue de la Couronne, Québec (Québec), G1K 9A9

> 490, rue de la Couronne, Quebec, Quebec, G1K 9A9

> 

> Laboratoire de cartographie numérique et de photogrammétrie (LCNP)

> Digital Cartography and Photogrammetry Laboratory (DCPL)

> Commission géologique du Canada (Québec) / Geological Survey of Canada (Quebec)

> Ressources naturelles Canada / Natural Resources Canada

> Gouvernement du Canada / Government of Canada

> http://cgc.rncan.gc.ca/org/quebec

> http://cgc.rncan.gc.ca/dir/index_f.php?id=4186 / http://cgc.rncan.gc.ca/dir/index_e.php?id=4186

> 

> 

> _______________________________________________

> auscope-geosciml mailing list

> auscope-geosciml at lists.arcs.org.au

> http://lists.arcs.org.au/cgi-bin/mailman/listinfo/auscope-geosciml

 

_______________________________________________

auscope-geosciml mailing list

auscope-geosciml at lists.arcs.org.au

http://lists.arcs.org.au/cgi-bin/mailman/listinfo/auscope-geosciml

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengeospatial.org/pipermail/geosciml/attachments/20110620/1032cd5b/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 3701 bytes
Desc: attc22eb.gif
URL: <http://lists.opengeospatial.org/pipermail/geosciml/attachments/20110620/1032cd5b/attachment.gif>


More information about the GeoSciML mailing list